In daily life, more and more families choose solar energy system, so how is the solar energy system installed on the roof? Roofs are divided into tile roofs, tin roofs, flat roofs, and today we take tiled roofs as an example. At first, you will need to prepare solar mounting structure: include tile roof hook, aluminum solar rail, mid clamp, end clamp and install tooling. Step 1: Find a suitable po...

Solar carport system is customized according to the projects' requirements. In order to provide a suitable system for you, the following information are needed for our engineers when designing a solar carport system: 1. Material: 2. Panel dimension: 3. Panel array: 4. Tilt angle: 5. Wind load: 6. Snow load: 7. Ground clearance:

Double hanger bolt: Double hanger bolt products are widely used in tin roof, ceramic tile roof, asbestos tile roof solar panel mounting systems with the advantage of easy installation and multi-functions. Here we talk some product information about it. 1. Material: SUS 304 & EPDM rubber 2. EPDM rubber: waterproofing 3. The former section of the bolt: It is used to fix the L feet, usu...

For tin/metal roof solar panel mounting system, there are mainly two ways: 1. With mounting rails 2. Without mounting rails Installation process: a. Fix roof hooks on roofs; b. Place rails/ L feet/ other accessories; c. Place solar panels; d. Fix the panels on roofs by mid and end clamps Something should to attention: 1. Roof hook brackets should be matched to the tile roof. 2. Whether it penetrat...

L feet mounting bracket is widely used in solar tin roof mounting systems, which is suitable for trapezoidal roofs and any flat iron roofs. Also, after adding special-shaped rubber pads, it can also match the corrugated tile house. Usually, L feet is used with SUS 304 double hanger bolts. Advantage:  wide applicability Disvantage:  The roof will be penetrated, and the waterproof effect d...

Solar roof mounting system is popular. And here are 3 mainly types of roof: 1. Tile roof; 2. Tin/Metal roof; 3. Flat concrete roof. So what information is needed when giving a solar panel mounting solution design for metal/tin roof? Except for the following common information of project: 1. Panel dimensions: 2. Panel array: 3. Wind load: 4. Snow load: The roof information is also needed: 1) Clamps...

For tin roof solar panel mounting system, if you want different angles, then this adjustable solar mounting system is suitable for your project. This system mainly contains front leg brackets, adjustable rear leg brackets, rails, rail splice, solar mid & end clamps. The angle can be adjustable: 10-15 degrees, 15-30 degrees and 30-60 degrees, based on the length of rear leg brackets.